36 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The cot does not comply with the Consumer Goods (Infant Products) Information Standard 2024 . The required information and warning labels are missing from the cot, including the warning about suffocation from the cot’s packing materials.
The rails at the short ends of the cot may dislodge when the bed base is positioned to the lowest setting or following movement or impact.
The side rail of the cot may dislodge from the base when it is positioned to the lowest setting or following movement or impact.
The product does not comply with the mandatory standard 'Trade Practices Act 1974 - Consumer Protection Notice No.6 of 2005 - Consumer Product Safety Standard for Children's Household Cots.'
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children's Household Cots'. The cot fails various design, construction, performance and labelling requirements: 1. The distance between the top of the mattress base and the top edge of the lowest cot side does not comply. 2. A foothold is created when the mosquito net is installed. 3. The cot has an accessible sharp point. 4. The access fastening device does not automatically engage when the dropside is raised and may be able to be opened by a child from within the cot. 5. The warning labels and safety markings are missing.
The product does not comply with the mandatory standard 'Trade Practices Act 1974 - Consumer Protection Notice No.6 of 2005 - Consumer Product Safety Standard for Children's Household Cots.' The product does not meet the standard requirements of allowable gaps in the middle loop where the rattan is tied together.
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children's Household Cots'. When the cot based is used in the upper position the distance between the top of the recommended mattress and the top of the cot is not the required minimum distance, the height of the mattress is detailed incorrectly on its label and the edges exceed the required specification, some edges are not rounded enough.
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children's Household Cots'. The product is not compliant with the standard because of non-compliant gaps between parts of the cot, the drop-side not being able to slide freely down to the open position and the cot labelling failing the durability test.
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children's Household Cots'. The product is not compliant with the standard because of missing information on the cot base and in the instructions of the cot end assembly and has non-compliant gaps between the mattress base side rail and the vertical slats of the cot sides.
This product does not comply with the mandatory standard 'Consumer Protection Notice No. 6 of 2005. Consumer Product Safety Standard: Children's Household Cots'. The cot fails various design, construction, performance and labelling requirements.
Cots manufactured on 30 May 2017 do not comply with Consumer Protection Notice No. 6 of 2005 for labelling requirements. They do not have the appropriate warning labels affixed to the mattress base.
Some Troll mattresses to suit Nicole, Sun and Lukas cots may be undersized. Only undersized mattresses are recalled. Undersized mattresses that result in a gap greater than 4cm between the cot and the mattress do not comply with the mandatory standard 'Consumer Protection Notice No.6 of 2005 Consumer Product Safety Standard: Children's Household Cots'.
The white part of the clamp (which attaches the mobile to a cot or play pen) may crack and weaken the clamp.
The product does not comply with Consumer Protection Notice No. 6 of 2005 for labelling requirements regarding mattress dimensions. The label containing the required information may detach from the cot.
The product does not comply with the Australian mandatory safety standard. The cot fails various design, construction, performance and labeling requirements.
The product does not comply with the Australian mandatory safety standard. The cot fails various design, performance, informative labelling and marking requirements.
The product does not comply with the Australian mandatory safety standard. The cot fails various design, construction, performance and labelling requirements.
The products do not comply with the Australian mandatory safety standard. The cots fail various design, construction, performance and labelling requirements.
The product does not comply with the Australian mandatory safety standard. The cot fails various design, construction, performance and labelling requirements.
The cot may not meet the requirements of the Australian Safety Standard AS/NZS 2172:2003 as the mattress base could be installed incorrectly and the distance between mattress base and outer frame could be less than 30mm.
The product does not comply with the Australian mandatory safety standard, AS/NZS 2172:2003. In particular, the product has incorrect labeling and marking requirements.
The cot and cot mattress when used together do not comply with the Australian mandatory safety standard, AS/NZS 2172:2003. The height of the mattress exceeds the limit stipulated in the Australian Standard.
The product does not comply with the requirements of the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children's Household Cots'. Please see attached recall notice for more details.
The cot does not comply with the Australian Mandatory Standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements. The cots failed to comply with the requirements specified for adjustable mattress bases. In addition, the cots did not comply with the labelling requirements set out in the standard.
The baby cot does not comply with the mandatory Australian standard AS/NZS 2172:2003. Further testing has found there may be multiple failures with labelling, drop sides, dimensions, sharp edges and points and marking requirements.
The cot base is too wide, resulting in a narrow gap between the mattress base and the dropside bottom rail.
The cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements.
The baby cot does not comply with the mandatory Australian standard AS/NZS 2172:2003. Further testing has found there may be multiple failures with labelling and drop sides.
The cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements.
The Virginia Sleigh Cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements. There were multiple failures related to non-compliance with the safety and performance requirements for the cots.
The walnut cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements. There were multiple failures related to labelling and non-compliance with the requirements for drop sides of cots.
The cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements. There were multiple failures related to labelling and non-compliance with the requirements for drop sides of cots.
The cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety requirements. The cot is missing the required label on the mattress base, which notifies consumers of the recommended mattress size, the correct use of the adjustable base, and the supplier's details.
Nantucket cot did not meet the requirements of the Australian standard, AS/NZS 2172:2003, Cots for household use. The distance between adjacent filler bars and filler panels is less than the required 50mm gap on the left and right hand side.
Canterbury Cot does not comply with the mandatory Australian standard AS/NZS 2172:2003. There were multiple failures but the most concerning breaches relate to the strength of the access fastening device, which could be inadvertently lowered making it possible for a child to open the side of the cot.
The cot does not comply with the mandatory Australian standard, AS/NZS 2172:2003 Cots for household use—safety and performance requirements. There were multiple failures related to labelling and non-compliance with the requirements for drop sides of cots.