13 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The stitching on the satin seam at the front of the toy is faulty in some units. As a result the toys may liberate polyester fill during use and may not comply with the mandatory standard for toys for children up to and including 36 months of age (Australian Standard AS/NZS ISO 8124.1:2003, as amended by the regulation).
The presence of an undeclared allergen (dairy).
The garment does not comply with the mandatory standard for children's nightwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
When improperly used or left open after wheel removal or adjustment, the quick release lever may open more than 180° and become caught in the disc brake assembly. If the front quick-release cam lever has a clearance of less than 6 millimetres while riding it may come in contact with the front disc brake rotor.
There is a risk of the bottle grooves breaking off when opening the bottle.
There is a risk of the bottle grooves breaking off when opening the bottle.
People have been injured because pressure has built up and released unexpectedly when the white lid gasket has been inserted in the wrong orientation, and contrary to the instructions in the manual.
A front quick-release cam lever that has a clearance of less than 6 millimetres and is improperly adjusted or left open while riding may come in contact with the front disc brake rotor.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
There is a risk of the bottle grooves breaking off when opening the bottle.
The cigarettes do not comply with the Trade Practices (Consumer Product Safety Standard) (Reduced Fire Risk Cigarettes) Regulations 2008.
The presence of an undeclared allergen (dairy).
The presence of an undeclared allergen (dairy)