AUSTRALIAN PRODUCT RECALL

Assorted Bicycle Brands - Quick Release Cam Levers with a Front Disc Brake

Published 22 October 2015

Product

The recall addresses two issues. 1) Bicycles equipped with disc brakes and quick releases with levers that can open far enough to contact the disc brake assembly. 2) Bicycles with front quick-release cam levers that have a clearance of at least 6 millimetres, which is the equivalent of the width of a # 2 Pencil, between the leading edge of the cam lever in its most open position and the disc rotor while applying thumb pressure on the end of the cam lever directed towards the rotor (the “#2 Pencil Test”) are not included in this corrective action. Identifying features description Nil

Why it was recalled

When improperly used or left open after wheel removal or adjustment, the quick release lever may open more than 180° and become caught in the disc brake assembly. If the front quick-release cam lever has a clearance of less than 6 millimetres while riding it may come in contact with the front disc brake rotor.

Hazard

If the defect occurs, it may result in separation or sudden stoppage of the front wheel. This may cause the rider to lose control of the bicycle posing a serious fall hazard.

Read the official notice ↗

Source: Based on ACCC data or other content. ACCC © Commonwealth of Australia. ACCC-owned material is licensed under CC BY 4.0. RecallMatch extracts and formats notice information for screening. Third-party material may have separate rights. Source and reuse terms. Verify details in the official notice. RecallMatch is independent of the ACCC.