MA8000 charger
The affected products were received fitted with a 240V C13/C14 monitor style plug and socket for charging the 12V internal batteries.
AUSTRALIAN RECALL CATEGORY
Power supply and storage recalls.
199 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
Showing notices 97–144 of 199.
Shenzhen Sofar Solar Mass Energy Inverter
The inverter can exceed voltage limits, and may not switch off when required. Also, the inverter is not labelled to warn of a hot surface.
USB Charging Station
The product does not comply with relevant electrical safety standards and can overheat.
4 Port USB Travel Charger
The main body of the USB travel charger may become separated from the detachable 2 pin plug, leaving the 2 pin plug in the electrical socket. If this happens, live pins will be exposed.
Salzer DC Enclosed Isolators
The Salzer DC LB232 isolators may fail, causing excessive heat. This may cause the isolators to melt or char.
Salzer DC LB232 (a.k.a. IPV40E & IPV40ES) isolator switches
Some Salzer DC LB232 isolators have failed, generating excessive heat and causing the Salzer DC LB232 isolators to melt or char. This has caused localised smoke and heat damage to the area surrounding the component.
AC plug head adaptor
In some circumstances the faceplate may separate from the body of the AC plug head adaptor when unplugging the AC transformer from the power socket, exposing live parts.
Portable Luminaire, Travel Adaptor, Kitchen Machines
Products do not comply with Electrical Safety Standards.
EuroSlim model ES-002 massage cushion
The electrical adaptor is not certified and does not comply with Australian Electrical Standards.
Easi-Listener CD Player Set with international travel adapter
CD player was sold with an unapproved international travel adapter.
9.5V and 9V DC Adaptor
In some cases the housing can split apart causing exposure of electrical components.
Aerocool Power Boards
Internal wiring is secured and connected to the socket-outlet(s) in a manner that does not comply with the relevant safety standards for electrical safety.
Saber Inverter Generator
The DC battery recharge lead may be able to be inserted into a 240V socket.
Smart Scooter Royal Charger
The battery chargers supplied with the scooters are not approved for use in Australia and may not comply with the Australian safety standards.
Reposit Kit including RP115 Meter and Reposit Box
In most installation configurations the Reposit Kit does not meet the electrical isolation requirements of the most appropriate electrical safety standard (AS61010.1:2003).
Click 4 Outlet Powerboard
The plastic enclosure does not meet the flammability requirement of the applicable Australian Standard.
Clipsal Meter Box 230DRAVL, 230DRAQ, 230DRAQTP & 230DRAT
The conductive parts of the enclosure may not be effectively earthed, as the earth cable supplied in the meter boxes was not manufactured to specifications and is not compliant to standards.
Futuretronics Universal Charger
Some chargers are short circuiting while connected to a power outlet.
Powerleader 4 Outlet Surge Protected Heavy Duty Metal Powerboard
Cord anchorage may not be adequate.
AEE ShotBox AP10 Drone battery
Under certain circumstances, the lithium ion battery may malfunction during the charging process.
Phonak & Unitron Plug Adaptor Insert Provided with Switch Mode Power Supply
There is a risk of the adaptor faceplate being dislodged resulting in the internal components being exposed.
PowerCube ReWirable USB (Travel Adaptor Kit/Outlet Device)
The adaptor does not comply with Australian specifications.
US Electrical Plug sold with the Coby Max Series Battery Operated Travel 3 Head Rotary Shaver
The plug is for use in the United States of America only and does not comply with relevant Australian Electrical Safety Standards.
Detachable AC Plug Adaptor Insert Provided with PetSafe and SportDog Brand Products
Some of the plug inserts have a manufacturing fault that causes them to break apart while being unplugged from a power socket.
3DR Solo Smart Drone Quadcopter
Components of the drone sold between 1 January 2016 and 11 October 2016 had not been tested or approved by Australian electrical certification.
Green Smoke AC/DC Wall Adapter
The plastic housing of the wall adapters may crack or break which could also cause the unit's prongs to detach or the unit's wiring to become exposed.
Connexia Branded 8 and 4 Socket Surge Protected Powerboards
During use, there is a risk the unit can overheat resulting in the outer casing melting and insulation break down.
DC Isolating Switch
Faulty contacts.
Jama Universal Travel Adaptor
The Power Adapter is not approved for use in Australia and may not comply with the Australian Electrical safety standards.
Power Charge and Pro Charge - Ultimate Charging Kits
The USB Power Supply supplied as part of the Power Charge and Pro Charge Ultimate Charging Kits does not comply with AS/NZS 3112.
"Five" branded Heated Motorcycle Gloves
The wall charger is unapproved for the Australian market and does not have the correct pin configuration for Australian power outlets.
2 Wheel Smart Self-Balancing Scooter / Hoverboard (Charger with cord set only)
The battery charger is not approved and may not comply with electrical safety requirements.
Smart Self-Balancing Scooter/Hoverboard Charger
The battery chargers supplied with the hoverboards are not approved for Australia and may not comply with the Australian electrical safety standards.
Smart Electric Self-Balancing Scooter / Hoverboard (Charger only)
The battery charger may not comply with the Australian electrical safety standards and is not approved.
HSP / Wind Hobby Remote Control Car Battery Charger ("Travel Charger")
The front enclosure may separate from the main body of the charger exposing live parts.
"Neo" Hoverboard (Charger and Appliance Connector Only)
The battery charger and appliance connector do not comply with the Australian standards and are not approved.
Freego Hoverboard W1, W2 and W2SR (Charger Only)
The charger has no Australian approval, and therefore may not comply with Australian standards.
Mod Board 'Hoverboard' Model MOD001 (Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Go Easy Australia - Go Skitz Self Balancing E Board 'Hoverboard' Models S01 & S03 ( Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Self Balancing Scooter 'Hoverboard' with Charger
The charger has no Australian approval, and therefore may not comply with Australian standards.
Techwheel Z-01 'Hoverboard' (Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Powerpac Universal Travel Adaptor
This product has no electrical approval number for sale within the Australia.
iQ 10 Charging Station USB Charging Hubs
Faulty cable routing has the potential for mains voltage leakage to the output.
230DRAS1MI and 230DRAS2MI Meter Boxes
4CB163/6 Meter Isolator fitted in the 230DRAS Meter Box, may have the incorrect screw fitted on the lockout plate, causing electrical contact between the screw and metal bobbin assembly.
Kogan Rapid Charger
The enclosures of the plug portion can separate allowing access to live parts.
String Light with Power Supply
The power supply supplied with the products does not comply with AS/NZS 61347.2.13
Ultipower Automatic Desulfation Battery Charger
The charger and its associated power cord are not marked with a Safety Approval marking to indicate compliance with relevant safety standard.
Power Supply and Travel Adaptor supplied with PASCO String Vibrator WA-9857
The items do not comply with AS/NZS 3112. The items are not marked with a safety approval marking to indicate compliance with the relative safety standard. It is possible to have an overhanging live pin if the travel adaptor is inserted incorrectly.