Trione in-desk power hub
Due to an internal fault the power hub can overheat, burn and melt.
AUSTRALIAN RECALL CATEGORY
Power supply and storage recalls.
187 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
7kW EV Charger
The product does not comply with Australian electrical safety standards.
Power plug adaptor supplied with Advwin electric deep fryer
The power plug adaptor supplied with the affected deep fryers may overheat during use and cause a fire.
18m extension cord sold with Vax Bagged Backpack Vacuum Cleaner (VXCB-01)
The 18m orange extension cord can arc internally if the conductors break resulting in overheating and sparking.
SigenStor EC 8.0/10.0/12.0kW SP AU Energy Controllers
The AC plugs may overheat and become damaged, posing a risk of fire.
Preowned Xbox and Preowned PlayStation Consoles and Power Cords
Affected Preowned Xbox and Preowned PlayStation consoles may not have completed the required electrical testing before sale.
Giantz Twin Core Electric Cable (updated)
Due to a manufacturing fault the cross section and current rating of the cable is significantly lower than marked and advertised. This may cause the cable to overload, overheat and catch fire during use.
GoodWe EHB series and GEH series Solar Inverters
When the inverter’s bypass switch is turned to bypass position and the inverter is operating in backup mode, the inverter will export power to the grid through the bypass switch. This poses a serious safety hazard in the event of an islanding situation, as it could result in electric shock to consumers, people working on switchboards or individuals working on the power lines.
Powerwall 2 (updated)
Tesla has identified certain lithium-ion battery cells from a third-party supplier in a subset of Powerwall 2 systems that may fail and overheat. Tesla has received reports of Powerwall 2 units with the affected battery cells smoking or emitting flames, resulting in minor property damage.
USB Charging Cable, supplied with the AFL Superkick Speaker
The black USB cable can overheat and catch on fire.
Maxilink power supply units for television distribution amplifiers
These products have no insulation on the pins and do not comply with required Australian electrical safety standards.
Sensory Sensations Pea Pod
The electric air pump provided with the product does not comply with Australian electrical safety standards. The pump comes with a foreign plug and an adaptor which has not been tested.
PA-300C AC Power Adapter in CL and CV pianos
The adaptor may overheat and catch fire when used.
PA-300C AC Power Adapter
The adaptor may overheat and catch fire when used.
Powertech 30W USB mains power adaptors - sold at Jaycar Electronics
The outer casing of the power supply can come apart exposing the user to live parts.
Solar panels
The affected solar panels deteriorate and develop cracks on the back side of the panel, which could lead to live parts being exposed and could potentially make contact with live parts possible.
15A to 10A conversion lead supplied with certain UNIMIG welders
The 15A to 10A conversion lead does not comply with the relevant Australian/New Zealand electrical safety standard.
Enerdrive panel mount fuse block
The product packaging has been misprinted with an incorrect rating which indicates that more current can be drawn through the product than its actual capacity.
PB36-L powerboard and PB34UPD powerboard (sold at Bunnings)
The powerboards do not comply with flammability requirements. A seal to prevent water entering the powerboards is non-compliant. This can affect electrical parts causing the plastic materials to ignite.
36V 10A DC-DC lithium battery charger
Affected products can overheat and fail internally causing a voltage surge.
Panasonic corded power adaptor
The power plug may break apart and expose live wires.
BizLine quick connect power socket
The rear terminal cover can be opened without the use of a tool, exposing live parts.
Vernier Go Direct Charging Station
A short circuit can occur in the charger when multiple wand-style GDX wireless educational sensors with damaged electrical contacts are plugged into the charging station. This can cause the charger to overheat and catch fire. Incidents have occurred.
MS6117 - 240V 12Hour Programmable Mains Timer
The timer does not comply with the relevant Australian standard as it may not allow appliances connected to it to earth correctly due to insulation material being present on the earth plug pin.
Voltage regulator in Kawasaki general purpose engines
The voltage regulators in affected Kawasaki general purpose engines can malfunction. The affected voltage regulator can catch fire at any time, even if the engine is off or not in use.
IKEA Pty Ltd - ÅSKSTORM 40W USB charger
The power cable can get damaged or broken exposing users to live parts of the cable.
SunTank hybrid inverter JKS-5HLVS-ABI
The inverter has been supplied with an emergency power supply (EPS) plug that can be removed without the use of a tool and expose consumers to live terminals.
Liberator Pty Ltd – Power supply for 8 and 10 inch Rugged devices
This product does not comply with the relevant electrical standard. There is no insulation on the base of the contact pins.
MS-30 solar inverters (updated)
The inverters have been supplied with an AC plug that does not comply with requirements of the relevant electrical safety standard. The AC plug can be removed without the use of a tool and expose consumers to live terminals.
Camec double pole power point (GPO) with dual USB output
The product supplied is not a double pole GPO. When the power point is turned off, it does not completely isolate the electrical appliance from the power source.
Comsol 4 Port HDMI Switch
The product does not comply with the mandatory information standard for products containing button/coin batteries . The product does not include the required warning information.
solar power inverters models: SPH3000TL BL-UP SPH3600TL BL-UP SPH4000TL BL-UP SPH4600TL BL-UP SPH5000TL BL-UP SPH6000TL BL-UP
The inverters have been supplied with an emergency power supply (EPS) port plug that can be removed by hand without the use of a tool. If the plug is removed or if it is not connected during the installation process the user has access to live hazardous voltage.
Powerforce 15m Heavy Duty Extension Lead- Yellow
This product does not comply with Australian Standard AS/NZS 3199:2020. The connections in the extension lead may come loose resulting in the plug overheating or catching fire.
LG ESS Home Energy Storage System Batteries
Affected batteries may overheat and catch on fire.
Double USB powerpoint
The powerpoint does not comply with the relevant electrical safety standards due to unreliable contacts in the powerpoint.
18650 Battery charger supplied with Bigblue AL1300 lumen dive torch
The charger has not been tested to relevant Australian/New Zealand electrical standards: AS/NZS 61558.2.16:2022 - Safety of transformers, reactors, power supply units and combinations thereof , Part 2.16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications AS/NZS 3112:2017 Amd 1:2021 - Approval and test specification — Plugs and socket-outlets
Total Tools – Detroit 5 metre 10 Amp heavy duty LED indicator extension lead
The product does not comply with the Australian standard AS/NZS 3199:2020 Approval and test specification – Cord extension sets. The connections in the extension lead may come loose resulting in the plug overheating or catching fire.
Ozito petrol inverter generator - model IGP-2018
The product does not comply with the Australian electrical safety standard. The neutral wiring of the socket outlet has been wired incorrectly.
Kubota Generators - various models
The generators are not fitted with overcurrent protection that acts in all live conductors and all socket outlets do not have individual switching of all live conductors.
Bayer B15A20 Heavy Duty 240V 15A 20m Extension Lead
The connections on the plug of the extension cord may become loose. This can result in overheating or fire.
output connector clamps sold with Projecta battery chargers
The plastic covers on the output connector clamps are not adequately resistant to fire. They may overheat and catch fire.
SCA 10 Amp 3 Metre Extension Lead
Connections in the extension lead may be loose. This can result in the cord or socket overheating or catching fire.
SCA 1.6 Amp 3 Stage Battery Charger
The protection circuitry of the product is not compliant with Australian standards. This can cause the output connector of the battery charger to become live.
Calibre 20 AMP 7 Stage Battery Charger
The protection circuitry of the product is not compliant with Australian standards. This can cause the output connector of the battery charger to become live.
Jackson Model PEXT3M 3 Metre Extension Lead
The active and neutral connections are reversed on the extension lead socket outlet. This can cause parts of the appliance that is plugged into the extension lead to remain live, even if it is switched off.
Battery Charger for Cleanskin Duo 2200 Lumen bicycle light
Affected chargers with uninsulated plug pins do not comply with the Australian electrical safety standards.
Greengear LPG Generator Models GE-3000, GE-5000 and GE-7000
The LPG generators are not assessed and certified as safe for use in Australia.
SolaX Power Aus Pty Ltd - LG S/A Gen2 Home Energy Storage System (ESS) Batteries
The affected LG batteries may overheat and catch on fire.
Ultracharge 4-Way Tradesman Portable Power Board
The socket outlets' polarity is reversed. Items plugged into the board may be electrically charged at all times.
Detroit 10A 4-Way and Detroit 15A 4-Way Powerboards with RCD
The powerboards may have been incorrectly wired, the active and neutral wires are reversed.
Growatt 8.2kw Solar Inverter Model 8000 MTL-S (updated)
The connectors installed with the inverter are of different types and manufacturers, which does not comply with the electrical safety standards. The incompatible connectors could overheat or melt.
Mort Bay Power Boards - updated high-resolution images
The black on/off switch cover may break and separate from the product, exposing live parts.
ESS Home Energy Storage System Batteries
ESS Batteries may overheat and catch on fire.
Belkin Portable Wireless Charger and Stand - Model WIZ003
A manufacturing defect in the power supply unit can cause the charger to malfunction and overheat.
Keji Wireless Charging Pad
During charging, the unit may overheat.
Single module Compact RCBO Noark Model Ex9NLE-N
The product does not comply with the relevant mandatory electrical safety standard. When the unit malfunctions, it does not switch off the circuit as required.
Single Module Compact RCBO Noark Model Ex9NLE-N
The products do not comply with the relevant mandatory electrical safety standard. When the unit malfunctions, it does not switch off the circuit as required.
Transco Electrical Residual Current Device combined with Miniature Over Current Circuit Breaker (RCBO)
The product does not comply with the relevant mandatory electrical safety standard. The device may not provide circuit protection.
Travel Adapter
The adaptor does not comply with the relevant mandatory electrical standard. The adapter does not have an earth pin, but the socket allows for a three pin plug to be inserted. If a three pin plug is inserted, the connected equipment will not be earthed.
Clipsal Socket Outlets 10mA RCD and Service Panels 10mA RCD
The socket outlet residual current device (RCD) may not trip at the correct current limit, as required by electrical safety standards.
Kogan Muscle Therapy Brushless Massage Gun
The battery may fail and ignite during charging or use.
USB Charger Adapter for Zinus Suzanne Bed
The USB adapter supplied with the bed has incorrect power connectors, two pin (Type A) American, which do not meet the required electrical safety.
TVT, Honeywell, ADEMCO, CROW and other Digital Surveillance and Security Products
Products may be water damaged and moisture may have entered any of their power adapters or other electronic components.
SolarImmersion MKIV Power Diverter
If an electrical fault and overheating occur, the plastic cover may catch fire.
UltraFlex Battery Energy Storage Device
The UltraFlex was not designed to independently protect itself or the user against excessive voltage, overheating, or excessive gassing when combined with particular other equipment in a system.
Honda EU22i Generator
Water could enter the generator's inverter coupler and may cause corrosion, resulting in increased resistance, overheating and fire.
WireAlert Plug in Device
A component inside the unit that is live with 240 volts of electrical current, is accessible via a hole in the device. If a metal object is inserted into the hole from which the alarm noise emanates, while the device is plugged in, the metal object may come into contact with 240 volts, which may cause electric shock or electrocution.
Feit Electric 2 Pack Smart Bulbs
The item does not comply with the relevant mandatory electrical standard.
Barbie Disco Ball BT Karaoke and LOL Surprise Bluetooth Karaoke Machine
There are incorrect plug pins on the AC adaptor, which do not meet the required electrical safety standard (AS/NZS 60950.1:2015).
Delta UV Model EA-4H-10 Generator
The generator may overheat and ignite at the point where the cord is secured to the body assembly.
Yamaha Model EF2000iS 2018-2019 Portable Generators
The moulded area of the fuel tank to which the fuel valve is mounted, was moulded at the incorrect temperature.
3319 Battery Pack for Pelican 3315R and 3315R-RA Flashlights
The Battery Pack, for the Flashlights, could cause a short that could cause the Flashlight to overheat, melt or catch on fire.
Ouya Huyan Power Supply (Power Board) Model 0Y-AT04K
The plastic on the product does not meet the required electrical safety standards.
Pelican 9410 and 9415 NiMH Flashlights
The battery pack for the flashlight may become unstable, overheat and explode while charging.
Paramount Petrol and Diesel 240 Volt Generators
Incorrect wiring may be installed within the generator alternator.
MovitracB Frequency Inverter with Firmware 17 Installed in Devices such as In-Home Passenger Lifts
In-home passenger lifts using frequency inverters that have Firmware 17 installed may exhibit unexpected behaviour during operation.
Maxem Powerboard with Switch
Internal wiring may not be adequately secured and connected to the socket outlet.
Rechargeable 110 Lumen Outdoor Lantern 240V Charger
The battery charger enclosure may crack or separate, exposing live parts.
3.5KVA 2800W Petrol Generator
Generator winding is bonded to generating set frame.
Honda EU22i Generator
Loose or incorrectly installed screws may result in fuel leaking from the fuel cock during operation, storage or transportation of the generator.
RATO Generators Models R3000IE and R8750ID
The 12V dc battery charging plug lead may be able to be inserted into the 230V ac socket-outlet on the generator.
Colesmobile Universal Wall Charger (Model 1844154)
The product does not comply with the Electrical Safety Standard. The enclosure of the charger may separate and expose live parts.
Dielle Residual Current Device Model YK78
The product may not comply with the Electrical Safety Standard and may fail product standard test requirements. Approval mark N.21905 is not valid.
Apple three-prong AC Wall Plug Adapters supplied with Mac and certain iOS devices and as part of the Apple World Travel Adapter Kits
These Apple three-prong AC wall plug adapters may be susceptible to breakage, exposing electrical components.
“Luv Betsey by Betsey Johnson” Universal Rechargeable Power Bank
The product may lack recommended electrical safety features.
Pocket Power Charger Bank
The product does not comply with relevant electrical safety standard and has the potential to overheat.
Damage Control Engineering Power Adaptor supplied with Strymon Guitar Effects Pedals
The enclosure can break apart and expose live parts. These chargers also have no Australian certificate of conformity or approval and may not comply with Australian safety standards.
SV Power supply AP-5A
The product's construction does not comply with the electrical safety standards.
DC Isolator HGN4-32DC
Internal fault may cause the isolators to fail, causing excessive heat.
HGN4-25DC DC Isolator
Internal fault may cause isolators to fail, creating excessive heat.
Pure Sine Wave Inverter Battery Charger
The metallic body of the product and the socket outlets are not connected to earth. There is inadequate insulation between SELV and LV circuits.
Suppower Battery Charger Model M180600
The construction of the battery charger is not the same as approved. The earth wire is not connected to the metallic body of the charger.
Lightforce LiFePO4 Battery Charger
Some battery chargers may include power cords that do not have an earth pin.
Portable DVD Player 240V Mains Power Adapter
The 240V mains power adapter housing may separate if dropped (the in-car charger is unaffected).
SmartSpace Kit Home Electrical Components
The cables have failed some of the required ageing tests of AS/NZS 5000.2. The insulation could become prematurely brittle with age. If the insulation becomes brittle and the cables are disturbed, the insulation could break and expose live conductors, resulting in possible electric shock or fires. The circuit breaker and RCD do not pose a safety risk, however these components are not approved for sale in Australia.
Battery charger supplied with Solo 417 Sprayer
During charging, the charger can overheat, causing the wires to melt and potentially causing a fire.
MA8000 charger
The affected products were received fitted with a 240V C13/C14 monitor style plug and socket for charging the 12V internal batteries.
Shenzhen Sofar Solar Mass Energy Inverter
The inverter can exceed voltage limits, and may not switch off when required. Also, the inverter is not labelled to warn of a hot surface.
USB Charging Station
The product does not comply with relevant electrical safety standards and can overheat.
4 Port USB Travel Charger
The main body of the USB travel charger may become separated from the detachable 2 pin plug, leaving the 2 pin plug in the electrical socket. If this happens, live pins will be exposed.
Salzer DC Enclosed Isolators
The Salzer DC LB232 isolators may fail, causing excessive heat. This may cause the isolators to melt or char.
Salzer DC LB232 (a.k.a. IPV40E & IPV40ES) isolator switches
Some Salzer DC LB232 isolators have failed, generating excessive heat and causing the Salzer DC LB232 isolators to melt or char. This has caused localised smoke and heat damage to the area surrounding the component.
AC plug head adaptor
In some circumstances the faceplate may separate from the body of the AC plug head adaptor when unplugging the AC transformer from the power socket, exposing live parts.
Portable Luminaire, Travel Adaptor, Kitchen Machines
Products do not comply with Electrical Safety Standards.
EuroSlim model ES-002 massage cushion
The electrical adaptor is not certified and does not comply with Australian Electrical Standards.
Easi-Listener CD Player Set with international travel adapter
CD player was sold with an unapproved international travel adapter.
9.5V and 9V DC Adaptor
In some cases the housing can split apart causing exposure of electrical components.
Aerocool Power Boards
Internal wiring is secured and connected to the socket-outlet(s) in a manner that does not comply with the relevant safety standards for electrical safety.
Saber Inverter Generator
The DC battery recharge lead may be able to be inserted into a 240V socket.
Smart Scooter Royal Charger
The battery chargers supplied with the scooters are not approved for use in Australia and may not comply with the Australian safety standards.
Reposit Kit including RP115 Meter and Reposit Box
In most installation configurations the Reposit Kit does not meet the electrical isolation requirements of the most appropriate electrical safety standard (AS61010.1:2003).
Click 4 Outlet Powerboard
The plastic enclosure does not meet the flammability requirement of the applicable Australian Standard.
Clipsal Meter Box 230DRAVL, 230DRAQ, 230DRAQTP & 230DRAT
The conductive parts of the enclosure may not be effectively earthed, as the earth cable supplied in the meter boxes was not manufactured to specifications and is not compliant to standards.
Futuretronics Universal Charger
Some chargers are short circuiting while connected to a power outlet.
Powerleader 4 Outlet Surge Protected Heavy Duty Metal Powerboard
Cord anchorage may not be adequate.
AEE ShotBox AP10 Drone battery
Under certain circumstances, the lithium ion battery may malfunction during the charging process.
Phonak & Unitron Plug Adaptor Insert Provided with Switch Mode Power Supply
There is a risk of the adaptor faceplate being dislodged resulting in the internal components being exposed.
PowerCube ReWirable USB (Travel Adaptor Kit/Outlet Device)
The adaptor does not comply with Australian specifications.
US Electrical Plug sold with the Coby Max Series Battery Operated Travel 3 Head Rotary Shaver
The plug is for use in the United States of America only and does not comply with relevant Australian Electrical Safety Standards.
Detachable AC Plug Adaptor Insert Provided with PetSafe and SportDog Brand Products
Some of the plug inserts have a manufacturing fault that causes them to break apart while being unplugged from a power socket.
3DR Solo Smart Drone Quadcopter
Components of the drone sold between 1 January 2016 and 11 October 2016 had not been tested or approved by Australian electrical certification.
Green Smoke AC/DC Wall Adapter
The plastic housing of the wall adapters may crack or break which could also cause the unit's prongs to detach or the unit's wiring to become exposed.
Connexia Branded 8 and 4 Socket Surge Protected Powerboards
During use, there is a risk the unit can overheat resulting in the outer casing melting and insulation break down.
DC Isolating Switch
Faulty contacts.
Jama Universal Travel Adaptor
The Power Adapter is not approved for use in Australia and may not comply with the Australian Electrical safety standards.
Power Charge and Pro Charge - Ultimate Charging Kits
The USB Power Supply supplied as part of the Power Charge and Pro Charge Ultimate Charging Kits does not comply with AS/NZS 3112.
"Five" branded Heated Motorcycle Gloves
The wall charger is unapproved for the Australian market and does not have the correct pin configuration for Australian power outlets.
2 Wheel Smart Self-Balancing Scooter / Hoverboard (Charger with cord set only)
The battery charger is not approved and may not comply with electrical safety requirements.
Smart Self-Balancing Scooter/Hoverboard Charger
The battery chargers supplied with the hoverboards are not approved for Australia and may not comply with the Australian electrical safety standards.
Smart Electric Self-Balancing Scooter / Hoverboard (Charger only)
The battery charger may not comply with the Australian electrical safety standards and is not approved.
HSP / Wind Hobby Remote Control Car Battery Charger ("Travel Charger")
The front enclosure may separate from the main body of the charger exposing live parts.
"Neo" Hoverboard (Charger and Appliance Connector Only)
The battery charger and appliance connector do not comply with the Australian standards and are not approved.
Freego Hoverboard W1, W2 and W2SR (Charger Only)
The charger has no Australian approval, and therefore may not comply with Australian standards.
Mod Board 'Hoverboard' Model MOD001 (Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Go Easy Australia - Go Skitz Self Balancing E Board 'Hoverboard' Models S01 & S03 ( Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Self Balancing Scooter 'Hoverboard' with Charger
The charger has no Australian approval, and therefore may not comply with Australian standards.
Techwheel Z-01 'Hoverboard' (Charger Only)
The battery charger does not comply with the Australian standards, and is not approved.
Powerpac Universal Travel Adaptor
This product has no electrical approval number for sale within the Australia.
iQ 10 Charging Station USB Charging Hubs
Faulty cable routing has the potential for mains voltage leakage to the output.
230DRAS1MI and 230DRAS2MI Meter Boxes
4CB163/6 Meter Isolator fitted in the 230DRAS Meter Box, may have the incorrect screw fitted on the lockout plate, causing electrical contact between the screw and metal bobbin assembly.
Kogan Rapid Charger
The enclosures of the plug portion can separate allowing access to live parts.
String Light with Power Supply
The power supply supplied with the products does not comply with AS/NZS 61347.2.13
Ultipower Automatic Desulfation Battery Charger
The charger and its associated power cord are not marked with a Safety Approval marking to indicate compliance with relevant safety standard.
Power Supply and Travel Adaptor supplied with PASCO String Vibrator WA-9857
The items do not comply with AS/NZS 3112. The items are not marked with a safety approval marking to indicate compliance with the relative safety standard. It is possible to have an overhanging live pin if the travel adaptor is inserted incorrectly.
6040 CNC Router with Beige Controller Box, Plug Adaptor and Submersible Pump
The plug and flexible lead on the controller box and submersible pump do not have appropriate insulation or a Safety Approval marking to indicate compliance with the relevant safety standard.
Extracell Charger by Elcart
The Australian accessory kit features a 2 pin European plug that is not compatible with Australian outlet configuration. In addition, the charger does not have a certificate of conformity.
Performer 4 Way Power Board, Performer 4 Way Surge Power Board and Performer 6 Way Power Board
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
DC Solar Isolator Switches
The switch contact mechanism may overheat due to an internal fault; this could result in damage of the switch mechanism, internal arcing and potential damage to the enclosure and cables which could allow access to live parts.
Travel Adaptor and USB Power Adaptor
The plug pin is not insulated as required by Australian Standards AS 3122:2005.
"Chevron" Double Adaptors
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
"Chevron" 4 and 6 Outlet Surge Protected Power Boards
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
"Chevron" Surge Cube
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
“Essentials” & “Chevron” Double Adaptors
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
“Essentials” 4 Outlet Power Board & “Chevron” 4 and 6 Outlet Power Boards
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
“Essentials” & “Chevron” Surge Cubes
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
Woolworths Essentials Double Adaptor and Chevron Double Adaptor
Due to poor workmanship internal contact may occur between live parts and earth.
Assorted Olsent Powerboards
The electrical contacts of the sockets are poorly aligned and the plastic enclosures do not meet the flammability requirements of the applicable standard.
Olsent Powerboards 6 Outlets
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
PowerKing Lead Reel
If the device is overloaded, the overcurrent protection device may fail to operate and the product may fail the ignitability test.
4 Socket Powerboard Outlet
In certain instances there may be non-compliance in terms of ignitability, lateral strain and withdrawal force.
Travel Adaptor
The travel adaptor does not bear a regulatory compliance mark (RCM) or feature insulated pins as required by Australian Standards AS 3122:2005.
Travel Adaptor
The travel adaptors do not meet the safety criteria for the electrical safety standard AS/NZS 3820 and as a result a consumer may be exposed to live parts.
Avanco DC solar isolator switches
High temperature can occur at the internal switch plate, causing the contacts to spread and the polymer support plate to degrade.
Olsent 4 Outlet Powerboard
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
Aquael Circulator, Turbo Filter and Mini UV Power Supply
Some power plugs do not comply with the latest Australian Standards that requires insulation installed on the two power prongs.
Olsent Weatherproof Outdoor Power Kit
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
4 Outlet Powerboard Sold at Supercheap Auto, BCF and Ray's Outdoor Stores
Product does not comply with Australian and New Zealand electrical safety requirements concerning resistance to fire and a secure connection to inserted plugs.
International Travel Adaptor
The travel adaptors do not meet the safety criteria for the electrical safety standard AS/NZS 3820. As a result a consumer may be exposed to live parts.
Fluke BC1735/EELV Power Adapter
Fluke has determined that in some cases the housing fastening points of the BC1735/EELV Power Adapters may be loose, which may lead to separation of the housing.
Gensafe 6KVA 13HP Petrol Generator
The RCD (also known as earth leakage protection) may not operate correctly as there is no neutral link fitted.
PV Array Rotary DC Isolator
The products internal contacts may have a fault, where a high resistance connection may form.
Avanco Brand DC Isolators
The product features an internal fault, where a high-resistance connection may form.
Kawashima Pro2000i Inverter Generator
The 12 volt battery charger outlet does not meet Australian standards and could be mistaken for a 240 volt outlet. In addition, the battery charger lead supplied with the unit has a plug that could be mistaken for a 240 volt plug and inserted into a 240 volt outlet.
"PVPower" Branded DC Isolator
The product features an internal fault, where a high resistant connection may form.
Clipsal 413 Surface Socket
Terminal colour identification has been reversed on some product.
DC Solar Isolator Switches
The switch may still be ‘ON’ even when the handle is indicating ‘OFF’.
Amp-Fibian Circuit Breaker / Residual Current Device (RCBO)
Incorrect overload rating of supplied circuit breaker / RCBO allowing potential to draw more current than the fly lead rating.
The Boss 2KVA Inverter Generator
The plugs can be interchanged with the sockets. This means the 12 volt and the 240 volt are similar and confusion may result.
Detroit Generator(s)
Manufactured with a Multiple Earth Neutral (MEN) link between the neutral & earth without a Residual Current Device (RCD), which is non-compliant with safety clause 6 of AS2790 Electricity generating sets.
Saber Generator
Manufactured with a Multiple Earth Neutral (MEN) link between the neutral & earth without a residual Current Device (RCD), which is non-compliant with safety clause 6 of AS2790 Electricity generating sets. In addition, the Circuit Breaker Switch for Equipment (CBE) is single pole, which is non-compliant with safety clause 6.1.4.
Powerboard (6 Outlets with Surge Protection)
Due to poor workmanship, a short circuit can occur in the powerboard, possibly causing fire or electric shock.
NetComm Model NP204 200Mbps Powerline Adapter With AC Pass-through
The internal connection to the earth pin prong is deformed in some products of the affected batch; making them susceptible to not providing an earth connection.
NetComm Model NP504 500Mbps Powerline Adapter With AC Pass-through
The internal connection to the earth pin prong is deformed in some products of the affected batch, making them susceptible to not providing an earth connection.
Travel Power Adaptor
Safety test reports are not available for this specific adaptor with multiple plugs. Therefore, this product is not compliant with the appropriate Australian Safety Standard.
Assorted Powerboards and Double Adaptor
The products do not comply with electrical safety standards.
Bizline Screw Connector
When the screw is tightened in the screw connector, the connector housing may crack. In addition, if the cable is not properly secured in the housing this may cause a “hot spot” to develop and may pose a fire hazard.
Fast Lane FA-005 Radio-Control 3-Channel Helicopter
The rechargeable battery may overheat while charging.