Pool noodle (sold on TEMU)
This product does not comply with the aquatic toys mandatory standard . The product does not display the permanent warnings as required by the mandatory standard.
47 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
This product does not comply with the aquatic toys mandatory standard . The product does not display the permanent warnings as required by the mandatory standard.
These products do not comply with the mandatory standard for swimming and flotation aids . The warnings on the one-piece vests are not visible to supervising adult. The 3-piece float does not bear the complete mandatory warning.
The product does not comply with the mandatory standard for aquatic toys . The product does not contain the required warnings.
The product does not comply with the requirements of the mandatory standard for swimming and flotation aids . 1. The swimming aid vest packaging does not contain the required warnings. 2. Additional information about the safe use of the aid has not been supplied with the product.
The product does not comply with the requirements of the mandatory standard for swimming and flotation aids. • The product does not have the manufacturing batch identification legibly marked on it in a colour that contrasts the background colour. • The product packaging does not include the required information under the standard Additional information, as required by the standard for the safe use of swimming and flotation aids, has not been supplied with the product.
The product does not comply with the requirements of the Consumer Goods (Aquatic Toys) Safety Standard 2020' .
The product does not comply with the mandatory safety standard for swimming and flotation aids . The product: has only one inflation chamber, instead of the minimum of two required by the standard, was not sold with the required information booklet, and is not marked with the correct warning label.
The product does not meet the labelling requirements of the mandatory safety standard for aquatic toys . The product's warning label is removable.
The product may not comply with the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017'. Buoys in the affected batch may have an unreliable clip. The central (secondary) safety wall lock may not hold, allowing the buckle to be released with a one-hand motion, or by pulling firmly on both straps.
The product does not comply with the requirements of the mandatory standard 'Consumer Goods (Aquatic Toys) Safety Standard 2020'. The appropriate warning labels do not appear on the product.
The products do not comply with the requirements of the mandatory standard 'Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys'. The products do not have a non-return air valve and the appropriate warning labels do not appear on the product.
The product does not comply with the requirements of the mandatory standard 'Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys'. The product does not have a non-return air valve and the appropriate warning labels do not appear on the product.
The product does not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as the correct safety warning does not appear on the product.
The product does not comply with marking requirements of the mandatory standard 'Trade Practices Act 1974 - Consumer Protection Notice No.2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys', as a safety warning does not appear on the product.
The product does not comply with marking requirements of the mandatory standard 'Trade Practices Act 1974 - Consumer Protection Notice No.2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The product does not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The products do not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017', as a safety warning does not appear on the product.
The product does not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017' as a safety warning does not appear on the product.
The glitter beach ball contains small beads and pellets. The product does not comply the mandatory standard 'Consumer Protection Notice No. 13 of 2011 - Permanent Ban on Inflatable Toys, Novelties and Furniture containing Beads'.
The glitter pool noodle contains small beads and pellets. The product does not comply the mandatory standard 'Consumer Protection Notice No. 13 of 2011 - Permanent Ban on Inflatable Toys, Novelties and Furniture containing Beads'.
The product does not comply with marking requirements of the mandatory standard 'Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017'.
A supply process error resulted in some lifejackets being supplied without the CO 2 inflation cylinder.
The waist strap in the affected PFDs that secures the PFD to the wearer is only attached to the left hand side of the device. The waist strap is not attached to the right hand side of the device.
The product does not comply with the minimum buoyancy requirements of the voluntary Australian Standard AS 4758.1:2015 for lifejackets. The flotation material in the product provides insufficient buoyancy.
The product labelling is not in accordance with the Consumer Protection Notice No. 2 of 2009 'Consumer Product Safety Standard for Flotation Toys and Aquatic Toys'. The products are missing the following warning: WARNING. AQUATIC TOY. USE ONLY UNDER SUPERVISION.
The product does not comply with Consumer Protection Notice No. 3 of 2009 - Consumer Product Safety Standard: Swimming Aids and Flotation Aids for Water Familiarisation and Swimming Tuition for quality, labelling or user instruction requirements.
The product does not comply with Consumer Protection Notice No. 3 of 2009 - Consumer Product Safety Standard: Swimming Aids and Flotation Aids for Water Familiarisation and Swimming Tuition for quality, labelling or user instruction requirements.
The products do not have a warning label in accordance with Consumer Protection Notice No. 2 of 2009.
The swim ring does not comply with the mandatory standard Consumer Protection Notice No 2 of 2009 Consumer Product Safety Standard for Flotation Toys and Aquatic Toys. The rings do not carry the required statement that the product is not a lifesaving device, or the required warning that the toy should only be used in shallow water and under supervision.
These aquatic toys do not have required warning label in accordance with Consumer Protection Notice No.2 of 2009.
The product does not comply with the labeling requirements of Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys, because it is not marked with the required warnings.
The inflation plug can be removed from the frog and is a choking hazard. Product does not comply with mandatory standard Consumer Protection Notice No.14 of 2003 - Consumer Product Safety Standard: Toys for children up to and including 36 months of age.
The inflation plug can be removed from the frog and is a choking hazard. Product does not comply with mandatory standard Consumer Protection Notice No.14 of 2003 - Consumer Product Safety Standard: Toys for children up to and including 36 months of age.
The warning label is not on the outer surface of the products, so the products do not comply with Australian and New Zealand Standard AS/NZ 1900:2014 Flotation aids for water familiarization and swimming tuition
The product does not comply with the requirements of Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys. The valves on these armbands can leak and will deflate.
The product does not comply with the labeling requirements of Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys because the wording of the warning is incorrect and the size of the warning is 2-2.5mm in height rather than the required minimum of 6mm.
The product does not comply with the labeling requirements of Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys because it is not marked with the required warnings. The regulation requires aquatic toys to be permanently marked with the following warning in a contrasting colour: WARNING - AQUATIC TOY- USE ONLY UNDER SUPERVISION.
The plastic end caps may not be securely fixed to the dive stick, allowing the metal weights to be accessed by infants.
The outer and inner zip on the bean bag may not have a child-resistant slide fastener. In addition, the information labeling may not be the required height.
The floats within the vests may potentially separate, moving from the front to the back.
Due to poor workmanship the product may become unstable and tip over during use.
The product does not comply with the labeling requirements of Consumer Protection Notice No. 2 of 2009 - Consumer Product Safety Standard: Flotation Toys and Aquatic Toys because it is not marked with the required warnings. The regulation requires aquatic toys, such as pool noodles, to be permanently marked with the following warning in a contrasting colour: WARNING - AQUATIC TOY- USE ONLY UNDER SUPERVISION.