168 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
Showing notices 49–96 of 168.
The products do not comply with the 'Consumer Protection Notice No. 4 of 2014 as amended' - 'Consumer Goods (Bean Bags) Safety Standard 2014'. The bean bags do not have a child-resistant slide fastener or the required warning label attached.
The product does not comply with the 'Consumer Goods (Bean Bags) Safety Standard 2014. Consumer Protection Notice No. 4 of 2014 as amended'. The product's packaging does not have the correct warning label.
The product contains high levels of Formaldehyde in the MDF component of the product.
The product contains high levels of Formaldehyde in the MDF component of the product.
The seam strength of the bed rail may not be sufficient and the fabric may tear with use.
In beds with double drives, manufactured in the period from January 2012 to May 2013, some batteries may contain diodes which may be defective.
Beds with attached lifting poles, that were manufactured between April and August 2019, may have faults in the lifting poles.
A faulty batch of glue may result in the glass table top not being correctly secured to the legs of the table. The glass table top may detach from the legs of the table, possibly causing the table to collapse.
The product does not comply with the requirements of the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The bunk bed does not meet the requirements of the standard for a 'MAX. MATTRESS HEIGHT' label to be displayed on side of the upper bunk bed. The label should display the vertical distance between the upper surface of the guardrail and indicate the maximum height of the mattress being at least 160mm.
The products do not comply with the requirements of the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The front guard rail gap is too wide.
The product does not comply with the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The bunk bed does not meet the standard requirements for allowable protrusions, gaps between bars in the guardrails and the required labelling.
The timber legs supporting the dining table may split where they join the support bar that runs horizontally under the table top, possibly causing the table to collapse.
HEMNES bookcase and glass-door cabinet shelves can shrink and move in a dry indoor climate. This can result in shelves falling.
The product does not comply with the requirements of the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The bunk beds do not meet the requirements for allowable protrusions, guard rail height and entrapment hazards.
The product does not comply with the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The bunk beds do not meet the standard requirements for allowable protrusions, gaps between bars and the required labelling advising the Australian distributor's name and address.
There is a risk that the chairs are unstable and may break during use.
There is a risk the chairs are unstable. The legs of these chairs may break during use if they are not supported by brackets.
In some circumstances the chairs may break if a child leans on it at an angle.
The workstation may malfunction and the two gas cylinders that assist with lifting the desk may separate and discharge.
The product does not comply with the 'Consumer Goods (Bean Bags) Safety Standard 2014. Consumer Protection Notice No. 4 of 2014 as amended'. The product does not have the correct warning label attached.
The central support of this bed may collapse.
The poufs do not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014'. The poufs do not have a child-resistant slide fastener or the required warning label.
This product could pose a potential fall risk if the surface material becomes slippery when wet.
This recall relates to the remediation offered to consumers as a result of previous recall PRA2015/14628 . The plastic infill panel which was installed on the holes in the guardrail may become detached from the upper bunk.
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 1 of 2003. Consumer Product Safety Standard: Bunk Beds'. The middle opening in the top guard rail of the bunk bed is too small.
The GLIVARP dining table extension pieces can randomly detach from the rails and fall.
The product does not comply with the 'Consumer Goods (Bean Bags) Safety Standard 2014. Consumer Protection Notice No. 4 of 2014 as amended'. The product does not have the correct warning label attached and was sold with a paper clip to facilitate movement of the child resistant fastener.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014'. The product was sold without a child-resistant slide fastener and does not have the warning label attached.
This product does not comply with the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The support rail is not high enough.
Risk of glass shades breaking and falling.
The product does not comply with the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The bunk beds do not meet the standard requirements for allowable protrusions, gaps between bars in the side and end guardrails and the required labelling advising the Australian distributor's name, address and the country of origin.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014 as amended'. The product was sold with a paper clip to facilitate movement of the child resistant fastener and does not have the warning label attached.
The plastic multi-purpose latch may fail to hold cupboard doors and drawers closed.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014 as amended'. The product was sold with a paper clip to facilitate movement of the child resistant fastener and does not have the warning label attached.
This product does not comply with the mandatory standard 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2003 Consumer Product Safety Standard: Bunk Beds'. The gaps on the bed head are bigger than 9.5 cm.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014'. The bag is not fitted with a child resistant slide fastener and does not have the required warning labels.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014'. The product does not have the correct warning label attached.
The product does not comply with the 'Consumer Goods (Bean Bags) Safety Standard 2014'. The safety warning messages on the label of the bean bag are not worded correctly.
The product does not comply with the 'Consumer Goods (Bean Bags) Safety Standard 2014. Consumer Protection Notice No.4 of 2014 as amended' The product does not have the correct warning label attached and was sold with a paper clip to facilitate movement of the child resistant fastener.
The product does not comply with the mandatory standard 'Trade Practices Act 1974. Consumer Protection Notice No. 1 of 2003. Consumer Product Safety Standard: Bunk Beds'. The bunk bed was supplied without the required infill on the top bunk side panel.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014'. The warning label does not contain the correct information.
The product does not comply with the Consumer Goods (Bean Bags) Safety Standard 2014. The product does not have the correct warning label attached and was sold with a paper clip to facilitate movement of the child resistant fastener.
This product does not meet clause 6.3 of Consumer Protection Notice No. 1 of 2003. The top slats are more than 100 mm apart.
Potential for frame to detach from whiteboard exposing sharp edges.
The product does not comply with the mandatory standard 'Consumer Goods (Bean Bags) Safety Standard 2014 Consumer Protection Notice No. 4 of 2014 as amended'. The external cover/bag is not fitted with a warning label and the toggle has not been removed from the child-resistant slide fastener. The inner lining warning label does not have the correct wording.
The plastic mounts at either end of the wire may fail, resulting in the wire detaching from the mount.
The table's tempered glass top may shatter unexpectedly.
The string of pom poms on the canopy creates a potential strangulation hazard.