Galmet ColdGal Brushable Paint
The container may bulge or swell due to internal pressure build up. Contents can be expelled when the container is opened.
42 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The container may bulge or swell due to internal pressure build up. Contents can be expelled when the container is opened.
The integrity of the splice construction of the rope may fail under load when used.
The chain brake may not activate correctly if wood chips or debris accumulate, and the chainsaw is not cleaned and maintained regularly as per the manufacturer’s instructions.
Due to a manufacturing fault, the product can short circuit.
The charger does not meet Australian electrical safety requirements as the plug pins are uninsulated and it does not have the required Australian Regulatory Compliance Mark.
The gear head on affected brushcutters may break if the product is used with a shredder blade. If the gear head breaks the cutting attachment may detach during use.
The blade fastening bolts can fail and the blade may be released from the cutting disc while the product is in use.
The blade fastening bolts can fail and the blade may be released from the cutting disc while the product is in use.
The rear trigger switch can fail to rebound after being pressed, which can cause the hedge trimmer to activate unexpectedly.
Debris may break through the plastic case of the grass catcher while the mower is being used.
The products were sold without the warning information that is required for products containing button/coin batteries.
Due to a manufacturing defect, the camshaft decompressor mechanism in the engine can malfunction. In models without an electric starter this excessive force may be required to pull the starter rope to start the engine. In the model with an electric starter the electric starter may fail to start the motor.
A component in the battery may fail causing the battery to overheat and ignite.
Due to packaging damage, there is a risk that the user may be exposed to the contents of the product.
Due to packaging damage, there is a risk that the user may be exposed to the contents of the product.
Due to packaging damage, there is a risk that the user may be exposed to the contents of the product.
The brushcutter's spark arrestor may not be correctly fastened.
The telescoping poles of the Extendable Pole Saw & Pruner can become unsecured and/or separate, causing the poles to come apart, fall down and the saw blade and pruner head to drop.
The child resistant cap may not be properly tightened, which may mean the lids are loose and may come off if the bottle is picked up by the lid. If the lid comes loose and the secondary seal bursts, there is a risk that the user may come into contact with the contents of the product.
The connections of the handle to the bucket are not closed in an arc back to the main handle, resulting in protruding ends.
The screw connections of the trimmer heads may settle over time due to the plastic relaxing. This may result in the screws coming loose in operation. If the screws become loose, there is the potential for the moving parts to detach and fly off.
Due to misalignment in production, the float chamber may not have been installed correctly on the carburettor body. This may result in leakage of fuel during operation, storage or transportation of the mower.
Saw may not be earthed correctly.
When the lawn mower is in use, a short circuit in the electronic system may occur which could be caused by a possibly defective transistor in the motor control. This short circuit leads to the failure of the device and restart attempts will be unsuccessful.
In the event of a kickback, the chain brake guard may fail and allow the chainsaw to continue operating.
The fuel tank seal & fuel lines may leak petrol.
The fuel tank seal & fuel lines may leak petrol.
Some of the Kawasaki engines fitted to Bushranger edgers may experience a fuel leak from the fuel tank seam.
The fuel suction hose between the fuel tank and the carburetor had, in some units within the affected serial number range, become pinched during assembly at the factory.
The power plug does not meet the Australian electrical standard for insulation.
There is a risk of the internal switch contacting metal bolt causing a metal plate to become live.
If the blade disc system becomes damaged, or is not correctly maintained, the blade disc system can become out of balance, creating excessive vibration which may cause the blade disc to fracture.
A build up of dust and debris around the engine may result in an extraordinarily high muffler temperature.
During packaging the control cables may have become "kinked" due to crimping. As a consequence, the controls can bind and stick and the tiller tines may begin spinning as soon as the engine is started, or may not be able to turned off.
If the nut securing the blade is not properly tightened before use, in accordance with the instructions, the blade may detach.
In some cases there may be a malfunction of the electronics. If the malfunction occurs, the engine may operate at a faster speed and/or the blades may continue to move for a short time after the trigger is released. Under certain circumstances, the machine may start to operate when only one trigger switch is pressed.
In some cases there may be a malfunction of the electronics. If the malfunction occurs, the engine may operate at a faster speed and/or the blades may continue to move for a short time after the trigger is released. Under certain circumstances, the machine may start to operate when only one trigger switch is pressed.
The impeller can break during use and rupture the casing, giving access to live parts and releasing sharp objects at high speed.
If the nut securing the blade is not tightened correctly before use the blade may detach.
When stored lying in their side, some cans in the affected batch may weep very small amounts of product from the lid.
In rare cases, rust and corrosion may affect the bottom of the can, potentially causing the can to suddenly and violently burst.
The mower spindle on the left side has a washer that can deform and allow the spindle to loosen. If the spindle loosens, the blade on the left side may fracture due to the excessive vibration.