SAIC Motor Australia Pty Ltd — MG6 PLUS 2016 Rear Seat
The rear centre seat position of the MG6 PLUS is not fitted with a Child Restraint Anchorage as required by Australian Design Rule 34/02.
AUSTRALIAN RECALL ROUND-UP
11–17 December 2017.
8 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Selected 2017 1023E and 1025R Compact Utility Tractors
The Rollover Protective Structure (ROPS) retaining bolts may have been over torqued and stretched, which could cause the bolts to break.
Salzer DC Enclosed Isolators
The Salzer DC LB232 isolators may fail, causing excessive heat. This may cause the isolators to melt or char.
MY 2013-2017 NW & NX Pajero
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
Fixe Climbing PLX Hanger-1
Affected products have a very high and unusual tendency towards oxidation in marine environments.
WEBCO Front Shock Absorbers for Mitsubishi Pajero MY2000 onward
In certain circumstances, the shock absorber could fail and cause potential separation of suspension components.
Icecream Silicone Baby Teether
The silicone icecream teethers are smaller than the permitted dimensions and do not comply with the mandatory standard 'Consumer Protection Notice No. 14 of 2003 — Consumer Product Safety Standard: Toys for children up to and including 36 months of age'.
Bottled Wine
The recall is due to a packaging fault resulting in the presence of glass.