Jacuzzi J-200, J-300, J-400 and J-500 collection hot tubs
When the spa is in use, the temperature sensors can display the incorrect water temperature, with water being hotter than the set temperature (showing).
12 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
When the spa is in use, the temperature sensors can display the incorrect water temperature, with water being hotter than the set temperature (showing).
The gate latch guide tabs may break, stopping the engagement pin from retracting and connecting securely with the magnetic keeper. This will result in the gate not closing properly.
The controller has a flexible socket, which means it is possible for an AMP plug to be forced into the controller upside-down. This may cause the plugged-in device or parts touching the plugged-in device to become live.
The product does not comply with the Australian safety standard. The spa has only one suction outlet on the spa jet pump recirculation system, instead of two; the jet pump recirculation system has no way to release vacuum pressure at a single outlet.
The products may not comply with 'Australian Standard AS1926.1 2012 Safety Barriers for Swimming Pools' section 2.4.1.2. The Gate Hinge-Closer Kits may not self close properly.
Small pieces of material present in the tube of the 001969 snorkels or the mouthpiece of the 001970 snorkels may become detached.
The products do not comply with Australian Standard AS1926.1 2012 Safety Barriers for Swimming Pools section 2.4.2.1 (b). If the gate is open, turning the key in the striker component of the gate latch may cause the gate to remain locked in the open position.
The products do not comply with Australian Standard AS1926.1 2012 Safety Barriers for Swimming Pools section 2.4.2.1 (b). If the gate is open, turning the key in the striker component of the gate latch may cause the gate to remain locked in the open position.
The user may exit the lower section of the slide (flume) before reaching the pool entry point.
There have been reports of some cell components of the EcoSalt chlorinators fracturing/rupturing, causing damage to the cell and occasionally to connecting pipework.
The product does not comply with the mandatory safety standard for Portable Swimming Pools. Portable swimming pools and their retail packaging must display a permanent warning message. In this instance the product did not feature the warning message and safety sign on the product.
A fault in the heating element assembly may cause the water/wet parts to become electrically live.