Toy Story 5 Collector Cup and Topper
The topper can break into small pieces and create a choking hazard for young children.
72 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The topper can break into small pieces and create a choking hazard for young children.
The lid may detach from the tumbler in certain situations when used.
The stopper on affected products does not have a pressure release valve. Pressure may build up inside the container and may cause the stopper beneath the lid to eject forcefully when opened.
The spout may separate from the drink bottle, becoming a small part and a choking hazard.
The cup can break when filled with hot liquid.
The kettle does not have an automatic switch to turn it off when the water boils.
The lid threading of the drink bottle may shrink when exposed to hot liquids, causing the lid to eject as a projectile.
The print on the outside of the drinking glass contains levels of lead and cadmium that exceed permissible limits within the EU.
The bow-shaped handle on the affected products may break unexpectedly during use.
The glass may unexpectedly shatter.
These products don’t comply with the mandatory standards for products containing button/coin batteries . The screw in the battery covering can be removed. This could allow children access to the button/coin battery. The screw and/or battery covering could also be lost when replacing the battery. The products are missing warning information about: • the dangers of button/coin batteries to children • what to do when a person suspects someone has swallowed or placed a button/coin battery inside any part of their body.
The glass may break if pressure is applied to the inside of the tumbler.
Small metal pieces can detach from the press during use.
The affected PET bottle may over-pressure and explode during use.
When the cup is filled with hot liquid, the lid may rapidly release and pop off as there is no pressure release valve.
The affected product can break when used to store certain fruit or vegetables in liquid. Fermented food stored in affected products can build up gas and cause the jar to explode or make the lid difficult to remove.
The lid can shrink when exposed to heat and torque, causing the lid to detach during use.
The glass lid or the container can break from the pressure created from excess air being removed when using the Vac-U-Seal vacuum sealer wand.
The product has been incorrectly labelled as dishwasher and microwave safe. The gold rim around the product will overheat when placed in a dishwasher or microwave.
Cracks have developed in the mugs due to an error in the firing process.
The silicone sipper has not been attached securely and can become loose or separate. This defect has occurred.
The mugs may crack and break when filled with hot liquids.
The base of the bottle could break off exposing a solder dot that contains lead.
Due to a manufacturing defect, there is an increased chance that the drinking glasses may break when used.
Due to a manufacturing defect, the espresso maker's safety valve may not function properly and cause the product to burst. The burst can cause a sudden separation between the top and lower half of the espresso maker.
Glass fragments may be found inside the glass.
The dye used in the cotton piping of the green and brown placemats contains hazardous azo-dyes.
The small silicone valve in the cap of the drink bottle may separate.
The product may break during use.
The tip of the spoon may separate from the handle.
The small silicone valve in the cap of affected water bottles may separate from the cap.
The lid of the cup may leak.
In some cups the base of the cup may detach.
The spoon may contain primary aromatic amines above the acceptable limit.
The clear silicone spout on the water bottle may detach.
The spout on the drink bottle may detach.
Testing has shown that dibutyl phthalate (DBP) may leach out of TROLIGTVIS Travel mugs at above prescribed limits. During use of the travel mug, the chemical may enter the liquid contained in the mug. DBP is a chemical used to make plastics soft and pliable.
The mug may crack or break when filled with hot water.
The clear silicone spout on the water bottle can detach.
Potential for fragile glass bowl to shatter or break.
The base of the glass cup may separate from the rest of the cup if using boiling water.
The handle may detach from the cookware.
Manufacturing inconsistencies could cause the components of the product to rupture during or after freezing.
If pulled with reasonable force, the spout of the drink bottle may become detached, exposing a small ring.
The affected product may not release pressure as designed and may be at risk of unintended depressurisation and release of steam.
In some cups the bottom may detach.
Mug may crack and break when used with or exposed to hot liquids.
Under particular conditions the handle may detach from the saucepan.
The mug could crack when exposed to hot liquid.
The glass tumbler may break during normal use.
The lid may not lock securely and may come off under pressure.
The glass lid may break away from the bottle when the lid is unscrewed, leaving a sharp edge.
If the drink bottle is full and dropped with force onto its spout, the plastic nozzle inside the spout may break on impact.
Due to a manufacturing issue, the blade may break during use.
Some bottles may fail the drop test in the mandatory standard for toys for children under 36 months of age.
Stainless steel drinking straw is rigid and if used by a child there is a risk of injury where the child engages in activities unrelated to drinking, such as running or jumping, while using the straw.
The oven mitt does not meet temperature standards suitable for handling hot objects.
There is a weak point in the blade.
Some parts contained in the lid may separate from the lid.
The metal pin in the centre of the food safety holder cap accessory can become dislodged.
The rubber top on the bottle may become loose during use resulting in it detaching from the bottle.
The grey paint on the metal portion of the water bottle may contain excess levels of lead.
The base of the mug may crack, break and come free when boiling water or liquid is poured into the mug.
A potential manufacturing fault may be existent within this particular batch of mugs which may cause the mug to crack whilst containing hot liquid.
Due to a manufacturing error, the inside lining of the mug has been lined with a low temp decal which may result in pieces of the non-toxic decal coming away from the mug when boiling water is added.
A vacuum forms inside the cookware when lid is left on pot for periods of time (1-2h) after finishing the cooking process. If a vacuum forms after 1-2 hours this can create a 'pull' effect, causing the glass lid to break or shatter.
The metal cutting section may separate from the plastic frame during use
If a Thermomix TM31 with a grey lid seal is operated at high RPMs (i.e. at a speed of 4 or above) and then is immediately switched to the ‘lid open’ position, the lid may quickly release and liquid or food may escape from the mixing bowl.
The inner wall of the glass may shatter during normal use.
A ring of glass may separate from the top of the glass.
During normal use, such as when washing the glasses, the inner wall of the glass may shatter.
The breather that allows water to flow out of the bottle may detach and could potentially drop into the bottle. The small part may also be pushed in the bottle with small fingers.