PROSAFE Weldtec 25TIG/GOAT-P Welding Gloves
The hook and loop closure on affected gloves may smoulder or ignite when TIG welding.
37 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The hook and loop closure on affected gloves may smoulder or ignite when TIG welding.
The container does not comply with regulatory requirements for child resistant packaging.
The locking mechanism may not close properly on the brace, which may cause it to disengage and detach from the scaffold frame.
The black moulded plastic insulators may crack exposing the user to the metal parts of the connector and the risk of direct contact to an electrical current.
Due to the incorrect chemical composition of the electrode welding rods, the rods may not perform welds with the expected strength and quality.
The lids on some containers may not be secure and the product may have leaked. There may be traces of the product on the outside of the container or on the kit box.
The glass door may not have been toughened correctly, and may not shatter according to the requirements of the Australian toughened glass safety standards.
The earth and live wires may not be connected correctly, and the cable gland may not hold the cables tightly enough.
A manufacturing defect may cause paint to enter into the internal components of the pressure adjustment dial's electric switch, causing some external metal parts of the sprayer to become live.
The plastic button connection may detach from the abrasive disc.
The product may not have been toughened correctly, and may not shatter according to the requirements of the Australian Design Rules.
The neck on the spout of the can may separate from the body, resulting in the product leaking out.
Certain cans may have been damaged prior to purchase, during storage and handling. If damaged, the pressurised cans may rupture and expel their contents. Only cans damaged prior to purchase are recalled.
Certain cans may fail due to an increase in pressure.
Two batches of the product (36919 and 37449) may contain an incorrect gasket that is incompatible with the contents of the product.
The cans may have a fine wire thread protruding from the top seam (see above photo).
The cans may have a fine wire thread protruding from the top seam (see above photo).
The cans may have a fine wire thread protruding from the top seam (see above photo).
The cans may have a fine wire thread protruding from the top seam (see above photo).
The cans may have a fine wire thread protruding from the top seam (see above photo).
Some electrodes from this part number and lot number combination may not perform as expected, due to an error in manufacturing.
The cables fail the required ageing tests of AS/NZS 5000.2. The insulation could become prematurely brittle with age.
When cable is fully extended, it is possible to push a finger through a hole from the socket assembly and touch a live part.
The HearPlugs may not provide the expected level of noise reduction.
The FRB 9mm Board does not comply with AS/NZS 5601, as the heat transfer coefficient is above the maximum allowed.
Diaphragm inside of exhalation valve may become rigid or brittle beginning after 5 years of storage. Moldex is reducing expiration dates of affected models in the market and those manufactured as of and after April, 8th 2015 to be 4 years maximum shelf life.
The product was designed to achieve the “Group 1” rating in accordance with AS/NZS 3837. Laminex has identified one shipment of product that failed to meet the products specifications. The affected product does not offer the expected fire resistance associated with product that achieves a “Group 1” rating.
The cables fail the required ageing tests of AS/NZS 5000.2:2006. The insulation could become prematurely brittle with age.
The cables fail the required ageing tests of AS/NZS 5000.2:2006. The insulation could become prematurely brittle with age.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.
There exists a manufacturing fault where a small number of products have untrimmed input power terminals located at the underside of the control box. The untrimmed terminals could potentially extend to, or close to, the surface of the underside of the control box, where a small ventilation cavity exists.
There is a possibility that the packs have become over-pressurised and may rupture during storage and use.
An issue has been identified with the insulation and sheathing PVC compound of the electrical cable that may lead to a reduction in the cable insulation integrity.