15 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The garments do not comply with the fire hazard labelling requirements of the mandatory standard 'Consumer Goods (Children's Nightwear and Limited Daywear and Paper Patterns for Children's Nightwear) Safety Standard 2017'.
The garments do not comply with the fire hazard labelling requirements of the mandatory standard 'Consumer Goods (Children's Nightwear and Limited Daywear and Paper Patterns for Children's Nightwear) Safety Standard 2017'.
The garments do not comply with the fire hazard labelling requirements of the mandatory standard 'Consumer Goods (Children's Nightwear and Limited Daywear and Paper Patterns for Children's Nightwear) Safety Standard 2017'.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
The valve may contain a hole, which may allow fuel to leak.
Due to a production fault, the front seat wiring harness may be damaged.
The treadmill does not comply with the mandatory standard 'Trade Practices (Consumer Product Safety Standard) (Treadmills) Regulations 2009'. The treadmill does not have the required warning sticker attached.
Migration of melamine has been found to be too high in one batch of the product.
The engine valve may leak and may cause the engine intake manifold to melt/deform.
Reports of generally mild, rare and transient visual adverse events, and concerns around the safety of blue light on the eyes.
The wreath surrounding the candle holder could catch fire and remain alight longer than permitted by the permanent ban 'Consumer Protection Notice No.12 of 2011 - Permanent ban on combustible candle holders'.
The decorations surrounding the candle holder could catch fire and remain alight longer than permitted by the permanent ban 'Consumer Protection Notice No.12 of 2011 - Permanent ban on combustible candle holders'.
The battery compartment may not be adequately secured with a screw in some instances, and the button batteries in the product may be easily accessible.
The Power-Train Control Module (PCM) software which controls the cylinder deactivation function may not operate correctly, and may cause an Intake Valve Rocker Arm to move out of position and make contact with other internal engine parts.
A manufacturing defect has been identified with the lithium battery.