Chilli Coconut Mayo 240g
Presence of an undeclared allergen (milk).
15 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Presence of an undeclared allergen (milk).
The Consumer Goods (Sunglasses and Fashion Spectacles) Safety Standard 2017 sets out the mandatory requirements for sunglasses and fashion spectacles. The products do not have appropriate labelling identifying lens category, description or compliance information.
No3 wheel and No5 (speed lock) wheel may fail due to breakage of conductors inside the supply cord’s inner and outer insulation due to flexing around the points of fixation. Rubbing against the spring also causes outer insulation to erode. Only No3 and No5 (which is a No3 but with the optional speed lock lever fitted) cone-drive wheels with the Black RCG motor are affected, where the electrical cord exits the motor on the same side of the spring. Wheels that might be affected were supplied between May 2015 and July 2018. Older wheels that had a replacement Black RCG motor fitted between those dates may also be affected if the cord exits the motor on the spring side.
Potential chemical contamination.
In some circumstances the base of the unit may break.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in an collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
Some 2018 Ranger 500/570 and EV/EV Li-Ion vehicles may have been manufactured with an improperly welded front lower control arm.
The Drill Press has exposed wires and terminals on the limit switch inside the pulley cover.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
Due to an error in assembly, some units may have a loose retaining clamp on the engine intake manifold/throttle body.
The affected toy may not comply with the mandatory standard for toys for children up to and including 36 months, Consumer Protection Notice No. 14 of 2003, as amended by Consumer Protection No. 1 of 2005. Small parts may detach from the product.
The jacket has a drawstring at the waist with a tightening system that includes a toggle and bead that may get caught in small spaces and entangle the wearer.
The recall is due to the presence of an undeclared allergen (dairy).
Under extreme conditions, the bottom part of the shock absorber may hit the control arm of the vehicle. This may cause the piston rod inside the shock absorber to break.
The products have features of strollers, but are unsafe for use as strollers as they do not come with parking brakes, tether straps or suitable warnings.