AUSTRALIAN RECALL ROUND-UP18–24 September 2017.
9 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Bicycles and scooters (push)Testing identified the harness may not meet all the performance requirements of the mandatory safety standard Trade Practices (Consumer Product Safety Standard)(Bicycle Helmets) Regulations 2001 Statutory Rules 2001 No. 279 as amended.
Hazardous materialsThe product does not have a sufficiently secure battery compartment.
Mobility and accessibility aidsIn some instances the front right wheel of walkers from batches FHFHCBR13 and FHFHCBR15 has worked loose or broken away from the frame.
Ride-on lawn mowers and tractorsA gear can fail in the transmission.
Pharmacy and medical productsError in dosage/administration instructions. There is an error in the labelling on the back panel of individual sachets of 4 batches of Lax Sachets with respect to the reconstitution information. The information on the carton and pack insert is correct. INCORRECT LABELLING - Administration: Each sachet should be dissolved in 1 litre of water. CORRECT LABELLING - Administration: Each sachet should be dissolved in 125 mL water. For use in faecal impaction 8 sachets may be dissolved in 1 litre of water.
General product safetyThere is a potential for the glass bottle to break upon opening.
General product safetyThe recall is due to potential microbial ( E. coli ) contamination.
Decorations, candles and noveltiesThe lighters are subject to Consumer Protection Notice No. 18 of 2011 Permanent ban on toy-like novelty cigarette lighters.
Pharmacy and medical productsThere have been recent reports of potential over-delivery of insulin shortly after an infusion set change. Subsequent investigations have found that this issue may be caused by fluid blocking the infusion set membrane during the priming/fill-tubing process. A membrane blocked by fluid most likely occurs if insulin, alcohol or water is spilled on the top of the reservoir or inside the tubing connector, which could prevent the insulin set from working properly.