Adventure Products, SCA and Venture BMW Plastics Caps
In some circumstances, the screw cap may split when tightened or sealed.
16 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
In some circumstances, the screw cap may split when tightened or sealed.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
In some circumstances, the screw cap may split when tightened or sealed.
Friction between the wall and the pressure mounted safety gate may not be sufficient to hold the gate in its intended position. In addition, the lower metal bar could constitute a tripping hazard.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
The impeller can break during use and rupture the casing, giving access to live parts and releasing sharp objects at high speed.
The caravan gas cooker has not been installed with adequate support in the cavity in accordance with AS/NZS5601 in order to prevent movement.
Due to improper installation or damage to the air swift, water may come into contact with the micro switch.
The recall is due to a system failure leading to the potential for unacceptable cracked eggs.
Possible cracking of the rear suspension swingarm.