Zipp 88 First Generation Front Hub
First generation 88 hub retaining rings may fail and this can result in ejection of all the wheel's spokes and subsequent wheel failure.
10 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
First generation 88 hub retaining rings may fail and this can result in ejection of all the wheel's spokes and subsequent wheel failure.
The heater does not comply with the flammability requirements of the Australian standard. Internal wiring may be loose and may make contact with moving parts.
If the rechargeable battery is placed in the torch the wrong way round, when the torch is then connected to the USB charging cable, it may cause the cable to heat up and potentially melt the cable.
The screw to the secure battery compartment is missing.
A fault in the heating element assembly may cause the water/wet parts to become live.
Leak occurs when the rubber material of the main fill valve seal separates from the brass poppet.
During operation of the pump control box, ineffective insulation of the internal water heating element may allow electrical current to enter from the element to the control box, water or wet parts.
The recall is due to potential Hepatitis A contamination.
The recall is precautionary due to potential microbiological contamination.
One of the towbar fitting components may be incorrect (spacer tube) and may cause movement between the towbar arm and vehicle chassis. Continual movement between the towbar arm and chassis may cause damage to the vehicle chassis.