Kuchef Professional Blender CB1390
Due to an inconsistency in the metal used in the manufacture of the lower blade of the blender, there have been instances where the blender blade has broken during use.
8 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Due to an inconsistency in the metal used in the manufacture of the lower blade of the blender, there have been instances where the blender blade has broken during use.
If the device is overloaded, the overcurrent protection device may fail to operate and the product may fail the ignitability test.
If the high pressure regulators are used at their maximum setting, the gas may extinguish the flame.
The garments are not labelled with the required fire safety warnings. The garments do not comply with the mandatory standard for children's sleepwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
If a Thermomix TM31 with a grey lid seal is operated at high RPMs (i.e. at a speed of 4 or above) and then is immediately switched to the ‘lid open’ position, the lid may quickly release and liquid or food may escape from the mixing bowl.
The adhesive holding the sticker to the plastic phone body may fail, causing pieces of sticker to become detached.
The axle of the pedal can break.
The axle of the pedal can break.