11 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
All eight characters may liberate stuffing during use and the hands and feet are small parts that are inadequately attached, presenting a potential choking hazard. In addition, the bean character incorporates a wire that may protrude through the fabric and cause puncture injuries.
The products internal contacts may have a fault, where a high resistance connection may form.
The affected VIN range has been expanded and some faulty shafts may have been missed. Some of the Steering Shafts fitted to these models may have been damaged during the manufacturing process, causing a slight bending and possible cracking of the shaft. Please note this campaign has been reported previously, and some units may have already been inspected.
The defect is possible cracking of the plastic fuel tank.
If overloaded, the product may restart at a higher speed potentially causing hot food to be ejected.
The floats within the vests may potentially separate, moving from the front to the back.
There is a possibility that the hinge bolt on the ladder is faulty.
The stalk of the bean has an internal wire. The ends of the wire have not been consistently finished and could pierce the fabric and become exposed.
The presence of foreign matter (metal).
The bows on these garments do not comply with the mandatory standard for children's nightwear and limited daywear, AN/NZS 1249:2003, as amended by regulation.
Harley-Davidson Motor Company, lnc. has determined that some of these motorcycles may have been assembled with a front brake line in a position where it could become pinched between the fuel tank and the frame, either at original assembly or in subsequent service activity. If this condition remains undetected it could cause front brake fluid pressure to increase while riding, possibly resulting in a front wheel lock-up.