10 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The seams are not strong enough to prevent infants from gaining access to the polyester fill, as the toy does not meet the requirements of clause 5.24.6.2 Tension test for seams in soft-filled (stuffed) toys of the mandatory standard for toys for children up to and including 36 months of age (Australian Standard AS/NZS ISO 8124.1:2003, as amended by the regulation).
The mounting plate for the electric bed may not be secured to the wall correctly.
If sufficient force is applied, the pop-top may become detached from the drink bottle.
In some circumstances, the bags have been found to contain foreign material such as small pieces of metal.
The fuel filter (installed between the fuel tank and fuel pump) on the Kawasaki engine in the utility vehicle may not have been manufactured within required specifications and may leak fuel.
The tempered glass lid has a manufacturing defect that can cause the lid to crack, break or shatter during normal use.
An aluminium threaded insert is glued into the neck of the stainless body of the bottle. In one reported instance, it appears that the alloy insert has been subject to corrosion, rendering it brittle and causing a piece of the alloy insert to fall into the bottle.
Some rear wheel rims of the scooters are too thin around the centre splined section. This may affect scooters sold from August 2011 to August 2012.
The product may produce small parts when dropped and does not comply with the mandatory safety standard for toys for children up to and including 36 months of age (Australian Standard AS/NZS ISO 8124.1:2003, as amended by the regulation).
Presence of foreign matter (wood and metal wire)