LightEASE Hexagonal LED lighting sold via Bunnings Warehouse
The product has live accessible parts and inadequate insulation along with a non-approved power cable and connectors.
33 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The product has live accessible parts and inadequate insulation along with a non-approved power cable and connectors.
The lamps do not comply with mandatory electrical safety requirements. Some of the lamps have exposed live parts. Other lamps have inadequate insulation which could result in the lamps becoming live in case of an internal fault.
The battery in the lamp can overheat and could catch fire when plugged to a power socket. Incidents have occurred.
The product does not comply with the mandatory standards for products containing button/coin batteries . The product has not been tested. The button/coin batteries are not adequately secured and are accessible to young children. The product does not include the required warning information.
The products do not comply with the relevant electrical safety standard. Connecting devices to the electrical socket outlet in the unit may overload the circuit.
The metal enclosure of the product is not grounded. The heating element can melt the insulation of internal wiring and cause the product to become live with electricity when used.
Metal plating of the light’s articulated arm is not adequately insulated. The arm may become live if damaged internal wiring comes into contact with the arm.
The internal batteries can overheat while charging and catch fire.
The supplied USB cable for the LED Flashlight may overheat and catch fire. It is unsuitable for use in chargers with currents exceeding 1Amp (including fast chargers or high powered chargers).
The light's LED components could overheat causing the housing to distort, melt or ignite.
The earth connection is missing from the internal metal casing. In the event of an internal component failure, the casing and mounting bracket will become live and the user can touch live parts
The earth connection is missing from the internal metal casing. In the event of an internal component failure, the casing and mounting bracket will become live and the user can touch live parts.
The earth connection may be missing from the front panel and the main power supply cable loom may be missing its harness. The user can touch live parts if the internal wiring becomes loose and makes contact with the unearthed metal enclosure.
The earth connection may be missing from the LED mounting plate and the internal wiring may be missing its harness. The user can touch live parts if the internal wiring becomes loose and makes contact with the unearthed metal enclosure.
The earth connection may be missing from the LED mounting plate and the internal wiring may be missing its harness. The user can touch live parts if the internal wiring becomes loose and makes contact with the unearthed metal enclosure.
The earth connection may be missing from the LED mounting plate and the internal wiring may be missing its harness. The user can touch live parts if the internal wiring becomes loose and makes contact with the unearthed metal enclosure.
The casing is not secured properly and the user can easily open it and access live parts.
The casing is not secured properly and the user can easily open it and access live parts.
The casing is not secured properly and the user can easily open it and access live parts.
The earth connection may be missing from the LED mounting plate and the internal wiring may be missing its harness. The user can touch live parts if the internal wiring becomes loose and makes contact with the unearthed metal enclosure.
The cable suspension may not adequately secure the light to the ceiling and may break.
There may be a fault in the part of the light that bears the weight of the lamp, which may lead to the buckling of the lamp suspension system.
The light fittings do not comply with AS/NZS 60598.1:2013.
The tube does not comply with Australian standards and is not approved.
Light fittings do not comply with the standard AS/NZS 60598.1. The luminaire may become electrically live due to inadequate clearance between the terminal block and its metal parts.
This product has no electrical approval number for sale within the Australia.
The luminaire has a flexible supply cord that may be tied in a knot and used as an anchorage. The terminal block on the secondary driver may be prone to charring. In addition, the accessible metal fins on the LED luminaire may not be earthed.
The battery cover may not be adequately secured due to the screws not being long enough, which could allow for access to the button batteries inside or the batteries falling out if the cover became detached.
This product has been manufactured with an internal metal shaft instead of a plastic shaft. The internal clearances have not however been increased as required by the product standard AS/NZS 61347.2.11:2003.
Battery terminals of flashlight could short circuit.
Non-compliant construction. Single insulated conductors in contact with unearthed metallic enclosure.
An issue has been detected with the cord sheath anchorage system with potential for the supply cord to separate from the lamp.
Affected products may not comply with the applicable Australian Standard AS/NZS 60598.2.1:1998. Specifically, the products may have incorrect internal wiring which is not double insulated and incorrect drivers. The result of this is possible direct exposure of the internal wiring to the conductible surfaces of the T8 tube.