Pop-up mini beach tent (sold on TEMU)
The products do not comply with the mandatory standard for portable swimming pools . The products do not have the required warning signs.
11 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The products do not comply with the mandatory standard for portable swimming pools . The products do not have the required warning signs.
The gas regulator and hose assembly supplied with certain Kickass Portable Camping Hot Water Systems have a rubber seal at the appliance connection point. The rubber seal may fall out, and if it is not present when connected, it will create a gas leak.
The magnet-lined closures of these products can fail and may cause the magnets to be released from the closure.
The rotating swing handle on the cookware, has a pivot-lock latching system to lock the handle in place for a secure grip when in use. If the user fails to properly latch and lock the handle or if the latch releases, the pot could become unstable with a left handed pour.
The drawbar of the Ezytrail K Series MK1 Albany Range, Lincoln Range, Portland Range and Stirling Range products was supplied with a weld attaching the top of the drawbar to the main body, this weld may be subject to premature failure under extreme conditions.
In the affected batch (QYD - XXXX), the nylon latch strap material is too soft and may come undone in strong winds or when travelling at high speed or on a bumpy road.
The Bromic stove and the hot water system (either Smarttek or Country Comfort) mounted in the camper trailers were fitted in breach of AS/NZS 5601.2:2013 Gas installations - LP Gas installations in caravans and boats for non-propulsive purposes. The products were fixed to the camper trailers and were not installed by an authorised gas fitter.
It is a requirement of gas regulation AS/NZS5601.2:2013 that no downward facing flammable material may be within 450mm, taken from the highest part of the highest burner, in the airspace directly above the entire cooking appliance.
The front retro reflector is not within the height specified in VSB1.
Loose wiring at the appliance inlet connection can become detached and cause the chassis of the camper to become Live. Also there is damage to the insulation of the wiring near the socket outlet that can cause a risk.
Small metal shavings may be present and detach during use.