3F Single Point Manual Inflator (Model No: V96000) in Life Jacket Solutions and Marlin life jackets
Published 20 December 2024
Product
These inflators are installed in the following life jacket brands: Life Jacket Solutions (LJS) – Tidal and Response brands Model numbers T150M, G150M, B150M, WB100, PR150M, SRSS150. Marlin – Model number MK150. Check the grey plastic part of the inflator to find out if you have a recalled product. Recalled inflators are marked “V96000 Halkey Roberts ®” and have a manufacture date between 4 June 2021 and 15 April 2024 (this will be laser printed in the format MM/DD/YY). Inflators with a manufacture date of 2025 or later (laser printed in the format MM/DD/YY) on the grey body of the mechanism and a grey stripe on the yellow pull tab are not recalled .
Why it was recalled
The indicator status on the inflator may show the life jacket is ready for use even when the attached gas cylinder is empty, removed or not connected properly. The life jacket cannot inflate when this happens.
Hazard
Risk of drowning if the life jacket does not inflate as expected when the manual inflator is deployed.
Source: Based on ACCC data or other content. ACCC © Commonwealth of Australia. ACCC-owned material is licensed under CC BY 4.0. RecallMatch extracts and formats notice information for screening. Third-party material may have separate rights. Source and reuse terms. Verify details in the official notice. RecallMatch is independent of the ACCC.