Car Axle Stands 6000kg
The products are not marked with the appropriate operating instructions and the operating manuals are missing some of the required information.
9 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The products are not marked with the appropriate operating instructions and the operating manuals are missing some of the required information.
The products are not marked with the appropriate operating instructions and the operating manuals are missing some of the required information.
The Rear Carrier Rack has insufficient strength to carry its maximum payload of 3 kg.
The recall is due to bottle breakages.
Takata airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
If the drive belt breaks or fails, it may damage the fuel line and cause a fuel leak.
Hazardous voltage could reach a conductive part of the foot pedal if wires inside the foot pedal become detached from the potentiometer (small grey or blue plastic device), or corroded as a result of moisture, and then touch a metal rod at the top of the pedal. Wires can also twist and potentially break if the nut at the back of the pedal becomes loose.
The products do not comply with the performance or labelling requirements of the mandatory standard 'Consumer Protection Notice No. 1 of 2010 - Consumer Product Safety Standard: Vehicle Jacks'. The overload protection does not meet Australian standards. Incorrect labelling on the product or packaging may result in misuse of the product.
The recall is due to potential microbial ( Salmonella weltevreden ) contamination.