Sea-Doo LinQ Cooler 51L
The cooler latch can automatically lock when the lid closes, allowing a person to become locked inside.
14 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The cooler latch can automatically lock when the lid closes, allowing a person to become locked inside.
The product may overheat when charging causing localised heat damage to the area surrounding the product.
The 12V dc battery charging plug lead may be able to be inserted into the 230V ac socket-outlet on the generator.
If either of the rear hooks on the seat bag loosen or break, the bag may detach from its loops.
The recall is due to non-compliant labelling (incorrect Use By date).
A defect in the operating software of the joystick could result in the steering helm sensor providing the Vessel's control system with an incorrect reading, and may lead to unintended steering of the vessel.
The wooden shapes attached to the teething toys are smaller than the permitted dimensions specified in 'Consumer Protection Notice No. 14 of 2003 — Consumer Product Safety Standard: Toys for children up to and including 36 months of age'.
The affected product is being recalled due to the presence of certain species of mould, Penicillium chrysogenum and Penicillium flavigenum .
Stokke Steps Bouncer set accessory may not attach properly to the Stokke Steps high chair, even though the locking indicator turns green. If someone leans on or hangs off the back of the high chair, this may cause the product to detach from the high chair. This defect only occurs when the Stokke Steps High Chair and the Stokke Steps Bouncer are used together.
The recall is due to microbial ( E. coli ) contamination.
The spare part ignition switch may have imperfections in its ball springs. In the long term these imperfections may result in the failure of the ignition switch, which may cause the key position to inadvertently move from the "ON" position to the "ACC" position while the car is moving.
When re-assembling the Newborn Set harness after washing, consumers may misassemble the harness. This can lead to one or more harness attachment points detaching.
The battery compartment may not be adequately secured with a screw in some instances, and the button batteries in the product may be easily accessible.
The battery compartment may not be adequately secured with a screw in some instances, and the button batteries in the product may be easily accessible.