15 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a collision triggering the airbag, the metal inflator housing may explode/rupture under too much internal pressure.
There is risk that on some of the socks, the stitching that secures the pom poms may be insufficient. One or both pom poms could become detached.
These models were manufactured with insufficient shielding between the engine exhaust and rearmost seat close-off panel.
Due to a production error, a small number of bars on the tension lock buckles of the lower shoulder straps may have been cut.
If the yo-yo is dropped or hits an object, the clear covers on either side of the yo-yo may pop out and release the button batteries.
The ADR83 stationary noise test information sticker is not displayed on the motorcycle.
The ADR83 Stationary noise test information sticker is not displayed on the motorcycle.
The ADR83 Stationary noise test information sticker is not displayed on the motorcycle.
It is a mandatory requirement that a motorcycle must have each mechanical component accurately stamped and displayed for identification purposes according to regulation for ADR compliance. The following parts have been incorrectly stamped for identification purposes; • Fuel Tap • Rear Master Cylinder Cap • Tail light assembly • The ADR83 stationary noise test information sticker is not displayed
Insufficient declaration of milk, hazelnut and almonds as ingredients on the product packaging.
The front of the ring may be separated from the base, exposing the battery pack.
IKEA has received reports of children falling down stairs when the locking mechanism of the PATRULL gate has unexpectedly opened, due to the catch not returning to the correct position, and the user not being aware of this.
The animal pendant teether does not meet the Australian safety standards AS/NZS 8124.