10 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
The product does not comply with mandatory standard (AS/NZS ISO 8124.1, as amended by the regulation for projectile toys), as it is not marked with the required warnings for projectile toys.
If the item comes into contact with water or is subjected to pressure, seams on the Rattle may open, releasing small round beads.
The garments do not carry the required warning label information as required by the mandatory standard for children's sleepwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
Due to variations in the spoke manufacturing process, some spokes on the front wheel may exhibit quality deviations. Depending on where they are fitted in the wheel, care and spoke tension, it is possible that individual spokes may break while riding. This can overload the remaining intact spokes and consequently break them.
Due to variations in the spoke manufacturing process, some spokes on the front wheel may exhibit quality deviations. Depending on where they are fitted in the wheel, care and spoke tension, it is possible that individual spokes may break while riding. This can overload the remaining intact spokes and consequently break them.
The charger has no Australian approval, and therefore may not comply with Australian standards.
Small parts may detach from the product. The products do not comply with the mandatory safety standard for toys for children up to and including 36 months of age (Australian Standard AS/NZS ISO 8124.1:2003, as amended by the regulation).
In some circumstances the circuit board may short-circuit causing the screen to freeze.
The battery charger does not comply with the Australian standards, and is not approved.
The battery charger does not comply with the Australian standards, and is not approved.