Omer Zero3 Mask
Non-conforming glass was used for the lens, which may shatter.
10 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
Non-conforming glass was used for the lens, which may shatter.
The internal insulation is not to specification.
The battery cover may not be adequately secured due to the screws not being long enough, which could allow for access to the button batteries inside or the batteries falling out if the cover became detached.
The product may have a broken needle from manufacturing.
4CB163/6 Meter Isolator fitted in the 230DRAS Meter Box, may have the incorrect screw fitted on the lockout plate, causing electrical contact between the screw and metal bobbin assembly.
There is a risk of the bottle grooves breaking off when opening the bottle.
The garments do not carry the required category 4 High Fire Danger warning label information as required by the mandatory standard for children's sleepwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
The garments do not carry the required category 4 High Fire Danger warning label information as required by the mandatory standard for children's sleepwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
The length of the top is more than that allowed in the mandatory Australian standard for children’s nightwear, and garments do not carry the required fire hazard information as required by the mandatory standard for children's sleepwear and limited daywear, AS/NZS 1249:2003, as amended by the regulation.
The press studs may become loose during use resulting in them detaching from the garment.