Everlast Series 2000 250T 3.6KW Water Heater
A fault in the heating elements can cause water to leak through the element connections, resulting in the elements shorting.
9 product recalls were published during this week. Review the summaries below, then follow the official source before taking action.
A fault in the heating elements can cause water to leak through the element connections, resulting in the elements shorting.
The handle may loosen and/or detach from the body of the vessel due to not being manufactured to Breville’s material specification
In some instances the ‘LS-15’ connector’s electrical insulation may degrade over time with the potential to overheat, posing a fire and burn hazard.
The electrical contacts of the sockets are poorly aligned and the plastic enclosure does not meet the flammability requirements of the applicable standard.
The cables fail the required ageing tests of AS/NZS 5000.2:2006. The insulation could become prematurely brittle with age.
The potential exists for the product to discharge unintentionally.
The cot base is too wide, resulting in a narrow gap between the mattress base and the dropside bottom rail.
The speaker is not compliant with Australian Safety Standards
Due to a manufacturing defect, insulation on the internal wiring of the product can get heat damaged from the heat of the metal reflector.