RWS Livestock Stunning Cartridges (Captive Bolt Activator) (updated)
Due to a manufacturing defect, affected batches of cartridges can malfunction during use and discharge unintended or explode.
14 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
Due to a manufacturing defect, affected batches of cartridges can malfunction during use and discharge unintended or explode.
Due to a manufacturing defect, affected batches of cartridges can malfunction during use and discharge unintended or explode.
The front bellcrank in the brake system can fail. This can cause the brakes to fail.
The manually operated bee smoker has a bellows between the handle and smoker barrel. The bellows contains white (chrysotile) asbestos.
The product does not comply with the performance or labelling requirements of the mandatory standard 'Consumer Protection Notice No. 1 of 2010 - Consumer Product Safety Standard: Vehicle Jacks'. Incorrect labelling on the product or packaging may result in misuse of the product and the jacks do not reach 200% of the nominated capacity.
The battery-operated smoker has a small heat shield between the handle and smoker barrel. The heat shield contains white (chrysotile) asbestos.
The product was supplied with insufficient information on the label. Affected high lift vehicle jacks do not comply with the labelling or instructions required in the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Affected high lift vehicle jacks do not comply with the requirements of the mandatory standard for vehicle jacks, which is based on the Australian/New Zealand Standard AS/NZS 2693:2007.
Quality of the weld is poor in some cases, causing the plate to lift. This can result in the fence post protruding through the backing plate.
There may not have been any silicone applied to the internal baffle rivets, which are made of galvanised zinc and may corrode.
The product label has incorrect information about the formulation of the product and is printed with incorrect risk statements.