ACID MTB HYBRID GEN4 PRO bike crank arm installed on Cube E-mountain bikes
The crank arm may become loose and separate from the drive shaft on affected Cube E-mountain bikes.
23 archived Australian notices, each linked to its official Product Safety Australia source. The page updates automatically when new notices arrive.
The crank arm may become loose and separate from the drive shaft on affected Cube E-mountain bikes.
The steerer tube or fork may fracture or break during use.
The rear brake insert may come loose and cause the brake to fail.
The folding mechanism pivot bolt may fail, this can lead to excessive play in the steering and handlebars. The handlebars may also partly detach from the deck.
The seat post clamp may fail causing the bicycle saddle (seat) to dislodge.
The scooter’s stem may develop a wobble, crack or fracture during use.
The frame may break during use.
Due to a manufacturing fault, the bolts attaching the disc brake rotors may loosen and fall out.
Objects may get trapped between the bike's mudguard and the tyre. If this occurs this can cause the bike wheel to stop abruptly.
The front pulley's clamping bolts may not be tightened properly and may allow the steering wire to slip.
Due to a software update, the light module may overheat when the lights are being used. This may cause the scooter's controller or lights to fail and the scooter may shut down.
The adjustable T-bar on the steering stem may crack or fracture if the bolt is overtightened or if the scooter is ridden in rough conditions, such as off-road, over kerbs or speed bumps.
The front wheel can lock up when user is riding the scooter, causing the scooter to stop abruptly.
The stem bolt may fail, resulting in the stem detaching from the scooter deck.
The rear wheel may stop rotating and lock up while in use.
The battery does not meet safety standards.
The battery chargers supplied with the Electric Hoverboard Balance Scooter are not approved for Australia and may not comply with the Australian electrical safety standards.
The power supply and battery of the product do not meet the Australian Standards and are not approved.
The charger may not comply with Australian Standards or be approved for use in Australia
The battery charger may not comply with the Australian electrical safety standards and is not approved.
The battery charger may not comply with Australian standards.
The battery charger does not comply with the Australian standards, and is not approved.
The battery charger is not approved for use in Australia. The supplier has received reports of smoke and/or burning smell from the scooter/charger unit.